Cactus farming is the systematic planting and subsequent harvesting of cacti. Cactus farms are useful for acquiring green dye by smelting the cactus blocks. Efficient, productive, and interesting farm configurations can be achieved with the creative placement of water source blocks and sand.
Manual designs[edit | edit source]
Manual cactus farms can be a great start to farming cactus. Manual designs are generally cheaper, easier to build, and more lag efficient than automatic designs. However, manual farms are also less efficient and much slower than automatic designs. If you do not need a large amount of cacti, manual farms should be enough.
Cactus rows[edit | edit source]
This design is probably the simplest next to looting a desert biome. To build it, simply place cactus in rows 1 space apart from each other. It may be desirable to space rows 2 blocks apart to make harvesting easier without getting pricked. If you are not careful, there may be some loss from the cactus being destroyed.
Diagonal rows[edit | edit source]
This method of cactus farming allows for the player to harvest cacti without taking damage. It uses a platform and a water canal to collect the cacti. Wait for the cactus to grow and break the upper block while standing on the pedestal. It is not the most efficient nor compact design, but it could do for smaller farms. It has about a 15% loss rate.
- Cactus farming1iso.png
- Cactus farming2iso.png
- Cactus farming3iso.png
With upper layer
- Cactus farming4iso.png
Pour water there
- Cactus pedestal.png
Cactus pedestal farming in-game
Piston harvester[edit | edit source]
Generally speaking, the use of pistons in a cactus farm is a very laggy and noncompact way of harvesting. However, in a manual design, the use of pistons can be beneficial as they allow the cactus to be more tightly packed and make it easier to harvest without being damaged. Additionally, since all the cactus are broken at one, there is less for broken cactus to be destroyed.
The schematic shows an efficient way of building a farm like this. The redstone and pistons should be built 1 block beneath the sand. Cacti should be placed on every sand block. A block will need to be placed on the pistons or they will not push up high enough to break the cacti. If you are lacking in slime, gravel or another falling block can be used instead of sticky pistons.
Notice how each cactus is only next to 1 piston and each piston except on the edges is next to 4 cacti. When building, make sure it is same if you want to use the least pistons. The first time you build this, it may be helpful to place the sand and pistons first. You could do this on a level surface, digging an extra block lower for each piston. When you are satisfied that the placement of the pistons is correct, remove the sand and ground where the redstone goes.
Automatic designs[edit | edit source]
Automatic cactus farms work on the principle that if there is space available above a cactus, but there is a block next to where the new cactus block will be, then the cactus will grow and immediately break off. This principle can be used to create massive yet lag efficient designs.
Efficient design[edit | edit source]
The design of a cactus farm is critical to its efficiency. These points can help you to design farms with greater yields than you could otherwise obtain.
- The more densely packed a cactus farm is, the more cactus will be broken. It is important to not be fooled by the number of cacti fit into a space, but rather to look at the output of cacti based on the space. The best farms balance density and efficiency so that the highest yield is obtained.
- It is also important to choose a good block to break the cactus growth with. Using a regular block is inefficient since when items hit it they land on the cactus. The most ideal blocks are those with a hitbox similar to a fence post. When a cactus hits a fence post, it falls down to the ground rather than onto the cactus plant.
- Items can also hit the block above a cactus. If they do so, they can lose their momentum and fall back down onto the cactus. A half block space above the grown cactus should be sufficient to prevent this.
Standard automatic[edit | edit source]
A standard cacti farm usually looks something like this. Designs like these are not very efficient, however, when built on a large scale, they can produce thousands of cacti per hour. Usually water streams are placed at the bottom to wash the cacti into hoppers.
Xisumavoid design[edit | edit source]
This design uses efficient design principles to get higher output per block. Note that the iron bar in the schematic must be replaced with a fence post or it will not work.
To construct this design, first create a large square out of slabs. Next, place sand blocks every other block. Finally, place in water streams so that all the cacti flow into hoppers. Repeat this process above the bottom to stack the farm. As there are no pictures, it will probably be helpful to see the design in the video.
Zero-tick design[edit | edit source]
When a piston is zero-ticked next to a cactus, it increases the growth stage of the cactus by 1.Template:Until By doing this just right, some of the fastest cactus farms can be created. Alternatively, sand can be manipulated into a semi-stable state, further increasing farm output.