Talk:Ore

Graph

Seeing what's written about the coal, there are formula's known about the ore generating. Is it possible to draw a graph for the types of ore for how many % is usually that ore in a specific layer? I think it would be interesting.

I will upload an image showing the differences in ore by quadrant when I get the permissions. I am currently gathering information on all ores by layer and quadrant. NZPhoenix 06:13, 20 May 2011 (UTC)

Images

There needs to be a diamond ore image on the page. Timberdoodle 18:44, 20 May 2011 (UTC)

Huh? There is... --Warlock 18:45, 20 May 2011 (UTC)

In the section ore varieties I'm not seeing any image. Timberdoodle 01:12, 22 May 2011 (UTC)

Gold...?

According to this page, gold (and lapis lazuli) are found in layer 35 of the map, if only rarely. The thing is, I have now peeled back all of layer 36 of the map in a 130 by 130 block space (don't ask), and am currently well into peeling back layer 35, and I have found no gold or lapis ore blocks. What gives?!? Wandergirl108 01:15, 16 September 2011 (UTC)

Okay, I DID find gold ore while digging out layer 35, but that means that it didn't appear until layer 34, so again, what gives?Wandergirl108 13:39, 4 October 2011 (UTC)

It's all about chance and randomness: Gold is, very rarely, on layer 36. It is like 0.01% though, so assuming that is a correct guess you would on average find 1 gold per 10.000 blocks you remove. Since gold normally has about 4 pieces per layer, you'd need to mine 40.000 blocks at that layer to find one gold vein, on average. That is a 200x200 square. Again, on average, so you might as well need to mine 4 times as much if you are unlucky. Jippiedoe 13:51, 4 October 2011 (UTC)

1.8 please!

This really needs updating, it sure is different now and I want to know how much. Atleast clay is a lot less rare. Jippiedoe 10:31, 25 September 2011 (UTC)

i totally agree, but people didn't leave any sources on the program they made the diagram with, for me to check if it is updated to 1.8.1 yet edit: found it it's called mian (minecraft analyzer) -Wally

There is a picture that someone made about the new ore hights. Finally I know why my mine didn't work: I mined with layer 12 as the floor!Jippiedoe 14:05, 4 October 2011 (UTC)

Ore frequency

Could someone add some chart about how many blocks of ore you can find per chunk? Or, I'll conduct an experiment in MCEdit that removes all stone, sand, gravel, dirt, lava, water, and sandstone; conducting it in several biomes, when I have time. Skyminer707 20:08, 27 October 2011 (UTC)

I started trying to add rarity data from the individual articles, but it's very inconsistent so I'm not adding it to the article. It would be great to have some consistent measure. Here's how it looks:

Ore type	Commonly found up to...	Rare between...	None above...	Pickaxe needed for drop	Rarity
&format=original Coal	Layer 128	Layer 129-131*	Layer 132*	Wood or better	1.25% of all stone
&format=original Iron	Layer 64	Layer 65-67	Layer 68	Stone or better	0.72% of stone from rows 2-61
&format=original Lapis Lazuli	Layer 23	Layer 31-33	Layer 33	Stone or better	0.083% of all blocks / 0.1013% of stone (levels 13-16) average 3.43 per chunk
&format=original Gold	Layer 29	Layer 31-33	Layer 34	Iron or better	0.1437% (levels 2-28) average 7.5 per chunk
&format=original Diamond	Layer 12	Layer 13-15	Layer 16	Iron or better	1.276% of stone (levels 2-14) average 3.097 per chunk
&format=original Redstone	Layer 15	Layer 16	Layer 17	Iron or better	1.025% of stone (below level 14) average 25 per chunk

Seanos 04:32, 8 November 2011 (UTC)

I love this information, but is there a way to make it into more consistent units? Average number/chunk?  % of stone blocks? etc. I'm trying to come up with a reliable equation of efficiency*durability*(frequency of materials) to determine which tool set is really the best "value". I'm coming to the conclusion it's probably stone tools and iron armor, but maybe leather if you have a ranch. Of course enchantments can make the rarer materials more worthwhile... 130.212.135.38 03:00, 20 January 2012 (UTC)

Now that the 1.8 update is out, should I put the the default values for Spawn Size and Spawn Frequency in the table? 98.245.111.235 17:03, 27 August 2014 (UTC)

You should probably wait a bit, since 1.8 isn't quite out yet, only the pre-releases. 1.8 itself will be released September 2nd. --Sanoth^t|c 17:07, 27 August 2014 (UTC)

Adjacency to dirt and gravel

I remember hearing or reading somewhere that deposits of dirt or gravel underground always indicates there's an ore vein next to it. I've been playing the game since 1.5, and this has at least almost always turned out to be true. Is there some sort of deliberate pairing of the two in the generation code, or is this just a coincidence (i.e. any deposit of gravel or dirt is very likely to be next to an ore vein because, by the time you've dug through one, you've dug beyond the average distance between veins)? Steve the Pocket 00:51, 24 December 2011 (UTC)

Ore Spawning?

I have gone down mine shafts that I had been down dozens of times, and seen ore blocks of iron, coal, and occasionally rarer things like redstone or gold. They weren't in a dark corner or anything, they were in plain sight, even places I had to walk over multiple times. I can accept that I could miss blocks sometimes, but this has happened too often and in places too easy to see to be normal. I'm now starting to wonder if ore blocks can spawn in caves after chunk generation, or, if not spawn, be converted from existing blocks. I had considered it before, but do so now more than ever after Notch's GDC talk. In it, he mentioned that players had yet to discover something (though he said it wasn't a crafting recipe), and he mentioned both that the game has its' roots in serious physics and that unexpected consequences sometimes made it into the game. Additionally, in a newly created world, I was a level of 12 when I found a 6-block vein of coal next to a lava pool. While this in no way constitutes evidence, as coal can be found virtually anywhere, including places where one might expect diamond to be, it is interesting to think that if my theory is correct, this might naturally turn into diamond. This is all mildly crazy conjecture, and so I would welcome all of your thoughts and criticisms on the subject.

I don't believe you're crazy but you're definitely wrong. If I used a map viewer and highlighted all the diamonds. Played for a few days, then used the map viewer again there would be the same diamonds in the same locations (excluding ones I've mined of course). I've done this as well. Just today I noticed a pocket of iron in my xp farm room that I've been in dozens of times. It's the locations you've been too that you've set a routine where this happens since you do things more by muscle memory and less by sight. --Moxxy 01:43, 10 March 2012 (UTC)

Interactive Ore Chart Link

It seems this link http://www.digital-trauma.de/mc.html is broken. It opens the page, but the chart does not work. –Preceding unsigned comment was added by 147.206.4.254 ^(Talk) 14:30, 4 January 2013 (UTC). Please sign your posts with ~~~~

Works fine for me. Check your browser javascript settings. --Kanegasi ☺C 18:38, 4 January 2013 (UTC)

Ore vein size

I've noticed that iron, redstone, lapis, gold, and diamond ores are always the of the same vein types. I've changed some articles so that the vein size is 4 to 8, based on personal experience. (Before, they said 1-9 or 1-10. Also, iron may have 9 as a possibility.) Am I right? Also, are nether quartz ores of the same type? HotdogPi ⑬㊲ 04:05, 21 January 2013 (UTC)

Ores In Minecraft

Minecraft has a lot

I think you should not put this on the talk page. You are just wasting space!!!! Enderderp572 00:14, 7 July 2013 (UTC)

Ores. Most have almost the same texture.

Does anybody have any idea why Lapis, Emerald, And Nether Quartz have different textures than the rest of the ores? It seems weird they are ... well, different. I mean, Emerald ore doesn't look pixelated at first glance! Jeb should totally change them to look the same. If he adds Ruby, I could understand a different texture, but really? Enderderp572 20:01, 1 July 2013 (UTC)

I don't pretend to understand their reasoning, but I note that the "different" ores are also the same ones that are not on the "main sequence" of tool progression. That doesn't fully explain why redstone ore looks like the others, but redstone does have its own special role. --Mental Mouse 02:21, 3 July 2013 (UTC)

I don't understand. I still think they should all have the same texture. Enderderp572 00:14, 7 July 2013 (UTC)

Emerald ore tricks me out!

ALWAYS when i see emerald ore i think its diamond!

Also if you noticed,emeralds spawn more often than diamonds do.

Ideal layer

I copied the "ideal layer" column on the ores table from the Altitude page, but it keeps getting reverted. - MinecraftPhotos4U (talk) 19:04, 9 June 2016 (UTC)

It should be removed from that page too. It seems to be made up somewhat haphazardly, for example it claims 12 is best for redstone ore but 13 is best for diamonds, despite them having identical spawn ranges and diamonds being less common on 13 than they are at 11 or 12. Anomie x (talk) 21:34, 9 June 2016 (UTC)

Graph location?

In the section, Ores#Availability, it says "The graph on the right shows the ore distribution.". Except there's no graph on the right. There is a graph showing ore percentage distribution in the above section. -EatingSilencerforBreakfast (talk) 22:40, 26 January 2019 (UTC)

Netherite?

does the ancient thing count as a ore for netherite?

Rarity (Attempts per Chunk) and Amount (Blocks per Vain)

its not on the page and its feel like a necessity to add this